SEBU7645-06 Also, to help the hydraulic oil to warm up faster, hold the bucket control in the CLOSE position for short periods of ten seconds or less. This will allow the hydraulic oil to reach relief pressure, which causes the hydraulic oil to warm up more rapidly. NOTICE The hydraulic control valve may become overheated if the bucket is operated continuously under relief conditions. Cycle all controls in order to allow warm hydraulic oil to circulate through all hydraulic cylinders and through all hydraulic lines. When you idle the machine for warm-up, heed the following recommendations: « If the temperature is greater than 0° C (32° F), warm up the engine for approximately 15 minutes.
¢ If the temperature is less than 0° C (32° F), warm up the engine for approximately 30 minutes. If the temperature is less than — 18°C (0°F) or if hydraulic functions are sluggish, additional time may be required. 89 Operation Section Engine Starting