Komatsu — CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE

24. SERVICE PROCEDURE 24.9.2 CLEAN HYDRAULIC TANK STRAINER WARNING The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before changing the oil. When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it carefully. 1. Remove 4 bolts, then remove cover a . When doing this, cover a may fly off because of the force of spring b , so keep the cover pushed down when removing the bolts. 2. Hold the top of rod c and pull up to remove spring b and strainer d . 3. Remove any dirt stuck to strainer d , then wash in clean diesel oil or flushing oil. If strainer d is broken, replace it with a new part. 4.

When installing, insert strainer d into protruding part e of the tank, and assemble. 5. Tighten the bolts to install cover a . PC450-ENG 3-72