PACCAR 270 — Exhaust System

Noise and Emission Control Emergency repairs Check the air intake tubing, elbow connections, clamps, brackets, and fasteners for deterioration, cracks, and condition. If you find an air leak anywhere between the air cleaner and the engine, repair that leak immedi- ately. CAUTION: Air leaks cause excessive noise and may result in serious damage to the engine. If you do not repair them the engine dam- age will not be covered by your warranty. Repair all air leaks as soon as you find them. Check for exhaust leaks, which could indicate a leaking manifold gasket; replace gasket if neces- sary. Exhaust System Removing hood-mounted noise insulation.

Inspection and Maintenance Instructions If, during periodic inspection and main- tenance of other systems and compo- nents, it is found that parts of the noise control system require attention, we recommend that those par ts be inspected at more frequent intervals to assure adequate maintenance and per- formance. Do all checks and maintenance procedures listed in this manual under Engine Air Intake System and Air Cleaner. See “Maintenance and Lubrication Intervals” on Air Intake System – 104 – page 72 . Exhaust System Removing or rendering inoperative exhaust system components.

Fuel System Removing or rendering engine speed governor inoperative, allow- ing engine speed to exceed manu- facturer's specifications. Removing of air signal attenuator on engines equipped with this device. Inner Fender Shields Removing shield. Cutting away parts of shields or damaged or loose portions of shields. Noise Insulating Blankets Removing noise insulators from engine block or from around the oil pan. Cutting holes in, or cutting away part of noise insulators.