PACCAR 270 — Tips for Manual Transmission Operation

Operating the Transmission Driving If your truck has an Eaton ® Solo clutch, no adjustments are necessary. This is a self-adjusting clutch and requires no adjustments for wear. Inspect manual clutches according to the maintenance and lubrication inter- vals in this manual. Regular mainte- nance must be followed to maintain correct clutch adjustment. Have your dealer’s Service Department perform any adjustment necessary. Always use the clutch when making upshifts or downshifts. Always start in first gear. Never downshift when the vehicle is moving too fast. Tips for Manual Transmission Operation Clutch Adjustment The clutch is not a footrest.

DO NOT DRIVE WITH YOUR FOOT RESTING ON THE CLUTCH PEDAL. It will allow your clutch to slip, causing excessive heat and wear—damage could result. When you must idle your engine for any period of time, shift your transmission to Neutral and disengage the clutch (take your foot OFF of the pedal). This helps prevent unnecessary wear to your clutch release bearing, and it is less tir- ing for you, too. More Transmission Tips Release Bearing Wear “Riding” the Clutch WARNING! Do not coast with the transmission in neutral or with the clutch pedal depressed—it is a dangerous practice. With- out the use of the retarding power of the drivetrain, your vehicle can reach dangerous speeds.

At very high speeds you may not be able to put the transmission in any gear. At high speeds you could seriously damage your vehi- cle or cause an accident when you put the transmis- sion in gear. The engine speed could exceed the maximum governed speed and cause a serious acci- dent due to mechanical fail- ures.