Operating the Transmission Driving Eaton ® Autoshift™ Transmission - Electronic Shift Selector the Autoshift™ computer detects that conditions are right for a shift. The transmission signals the engine control- ler to break driveline torque and pro- vides engine RPM for synchronizing the next gear. When engine speed and gear speed are synchronized the trans- mission engages the next gear and sig- nals the engine to resume operation. Please see the transmission Operator’s Manual for further details on the trans- mission’s operation and components. WARNING! Do not leave the cab without applying the parking brake. The truck could roll and cause an injury accident.
Always apply the parking brake before you leave the cab. The MD transmission is programmed to restrict full operation until specific tem- peratures are reached. See the trans- mission manufacturer’s Operator’s Manual for details. The Eaton ® Autoshift™ transmission is an automated manual transmission. The Autoshift™ is a partially automated Eaton ® Fuller ® Roadranger ® transmis- sion that automatically selects and engages the transmission’s gears. The driver must use the clutch to start and stop the vehicle, but not for shifting through the gears. A shift begins when Operating Automated Manual Transmissions