PACCAR 270 — Disengaging the Cruise Control

Operating the Transmission Driving To decrease the cruise set speed, hold the SET/RESUME switch in the SET position and coast to a lower speed. To increase the cruise set speed, hold the SET/RESUME switch in the RESUME position; this will accelerate the vehicle to a higher speed. Do one of these steps to disengage the cruise control: Move the ON/OFF switch to the OFF position. or Disengaging the Cruise Control Depress the brake pedal. or Depress the clutch pedal. A NOTE: Toggling the SET/ RES UME switch to the RESUME position at this point will select the previously set cruise speed. 2. Accelerate the vehicle to the desired cruise speed.

Toggle the SET/RESUME switch to the SET position to set the cruise CRUISE ON/OFF SET/RESUME This feature improves fuel mileage and reduces driver fatigue by maintaining a constant vehicle speed. The cruise control will only operate above a pro- grammed minimum vehicle speed of 30 mph for the Cummins ISB engine. NOTE: Ensure that the vehi- cle speed is above the mini- mum cruise control speed and the engine speed is above 1100 rpm. 1. Move the ON/OFF switch to the ON position. Engaging the Cruise Control Cruise Control CRUISE ON/OFF SET/RESUME A