Steering Driving WARNING! Do not rely on an anti-lock brake system that is functioning improperly. You could lose control of the vehicle resulting in a severe accident and personal injury. If your ABS lamp goes on while you are driv- ing or stays on after the self- check, your anti-lock system might not be working. The ABS may not function in an emergency. You will still have conventional brakes, but not anti-lock brakes. If the lamp indicates a prob- lem, have the ABS checked. CAUTION: It is essential that the following driving proce- dures are observed: Do not abuse the ABS sys- tem by excessively harsh or delayed applications of the service brakes.
Anti-Lock Braking System (ABS) Your truck is equipped with an anti-lock braking system (ABS). The ABS reduces the possibility of wheel lock-up. If a wheel is about to lock during brak- ing, the ABS will automatically adjust air pressure to the brake chambers on the appropriate wheel(s) to prevent wheel lock-up. The ABS is automatically turned on when the ignition switch is turned on. Brakes 1. Move the ON/OFF switch to the ON position. or 2. Toggle the SET/RESUME switch to the RESUME position. The steering gear is hydraulically assisted. As excessive pressure may damage the hydraulic pump, stop turn- ing the steering wheel when the wheels are at full lock or are blocked by an obstacle.
Steering is also possible with- out power assistance, but this requires considerable effort. Reengaging the Cruise Control Steering