Cummins — INJECTION TIMING - GENERAL INFORMATION

Engine Assembly (00-02) Injection Timing - General Information N14 Page 0-81 The injection timing code appears on the engine dataplate. Codes are alphabetic letters that relate to a numerical specification. Specifications can be found in the Control Parts List (CPL) Manual, Bulletin No. 3379133. Advanced timing (1) means the fuel is injected earlier into the cylinder during the compression stroke. Retarded timing (2) means the fuel injection occurs closer to TDC in the cylinder. The amount of push rod travel determines the time of fuel injection in relation to the piston position.

A low numerical value of the push rod travel remaining indicates a greater degree of advanced (1) or fast timing. A high numerical value of the push rod travel remaining indicates a greater degree of retarded (2) or slow timing. Injection timing changes are accomplished by advanc- ing (1) or retarding (2) the cam follower action in relation to the piston position. This is accomplished by changing the orientation of the camshaft lobe to the cam follower using different cam follower gasket thicknesses or offset camshaft gear keys. NOTE: Gear train timing (index mark alignment) always remains the same.