Cummins — TIMING TOOL INSTALLATION

Injection Timing - General Information Engine Assembly (00-02) N14 Page 0-82 NOTE: The injection timing check is a measurement which determines the injector push rod travel in relation to the piston travel. Due to normal parts tolerances, it is necessary to check one cylinder for each cam follower housing. Timing Tool Installation Caution: Pivot the dial indicator stems away from their respective plunger rods before installing the timing fix- ture to prevent damage to the indicators. Install the piston plunger rod in the injector bore of the No. 1 cylinder. NOTE: Make sure the plunger is centered and on top of the piston. Align the swivel bracket with the injector clamp capscrew hole.

Install the 6-inch swivel bracket capscrew. Tighten the capscrew finger tight. Position the push rod plunger rod near the push rod. Tighten the swivel bracket capscrew enough to hold the timing tool rigid. Make sure the piston plunger post is clamped squarely to the cylinder head.