Cummins — C-BRAKE - ALTERNATE METHOD

Engine Brake - Adjustment Engine Assembly (00-02) N14 Page 0-118 Use the torque wrench adapter, Part No. ST-669, and a 1/4-inch eight point socket to tighten the lock nut. Torque Value: 24 [18 ft-lb] Repeat this procedure to adjust the remaining slave pistons. C-Brake Set Position - STC and CELECT™ Bar In Direction Pulley Position Set Brake Start A or 1-6VS 5 Advance to B or 2-5VS 3 Advance to C or 3-4VS 6 Advance to A or 1-6VS 2 Advance to B or 2-5VS 4 Advance to C or 3-4VS 1 Firing Order: 1-5-3-6-2-4 Right Hand Rotation C-Brake - Alternate Method A feeler gauge, Part No.

3823802, can be used in place of the dial indicator in applications that do not have ad- equate clearance for the indicator to be installed. Insert the feeler gauge blade between the crosshead and both contact surfaces of the slave piston. NOTE: An accurate C-Brake setting can only be obtained if the feeler gauge is below both contact surfaces of the slave piston.