Engine Assembly (00-02) Fuel Tubing - Installation N14 Page 0-123 Install a new o-ring on the oil pan lubricating oil suction tube. Use clean vegetable oil to lubricate the o-ring. Loosely install the lubricating oil transfer tube assembly with the lubricating oil pump mounting flange, new seal- ing ring, new gasket, and the mounting capscrews to the oil pan and lubricating oil pump. NOTE: The printed side of the mounting flange gasket on the oil transfer tube must be toward the flange. Tighten the capscrews in the following sequence: First, tighten the two capscrews (1) at the oil pan. Second, tighten the capscrews (2) at the lubricating oil pump. Torque Value:
47 [35 ft-lb] Fuel Tubing - Installation Install fuel supply tube and fuel return tube to the engine. Tighten the tube nuts to the torque value specified for the size of the tube. Refer to the chart in Section 18. Secure the tubing with the required clamps. Tighten the mount- ing capscrews to the torque value specified for the size of the capscrew. Refer to the chart in Section 18.