Alternator Mounting Bracket - Installation Engine Assembly (00-02) N14 Page 0-142 Alternator Mounting Bracket - Installa- tion Install the alternator mounting bracket. Tighten the mount- ing capscrews. Torque Value: 47 [35 ft-lb] Alternator - Installation Install the alternator, capscrew, washer, and nut to the alternator mounting bracket. Install the adjusting link and the mounting capscrews. NOTE: Do not tighten the alternator mounting and adjusting link capscrews and nuts until the alternator belt is installed and adjusted. Alternator Belts - Installation and Adjustment Install new alternator belts on the pulleys.
Use a pry bar between the engine and the alternator to tighten the alternator belt. Use belt tension gauge, Part No. ST-1274, to measure the belt tension.