Cummins — FAN AND FAN SPACER - INSTALLATION

Engine Assembly (00-02) Fan and Fan Spacer - Installation N14 Page 0-143 Adjust the belt tension to the following values: New Belt Tension Used Belt Tension 620 N [140 lbf] 490 N [110 lbf] NOTE: A belt is considered used if it has been in operation for more than 10 minutes. If the belt will not maintain the correct tension, it must be replaced. Tighten the adjusting link capscrews to the following torque values (Grade 5 or higher): Bolt Size Threads/ Inch Ft-lb 5/16 18 20 [15] 7/16 14 34 [25] 1/2 13 68 [50] Tighten the alternator to alternator support capscrew and nut to the following torque values (Grade 5 or higher):

Bolt Size Threads/ Inch Ft-lb 3/8 16 41 [30] 7/16 20 88 [65] 1/2 13 108 [80] Fan and Fan Spacer - Installation Install the same number and thickness of fan spacers as were removed during disassembly. Install the fan. Tighten the 3/8-inch capscrews or hexa- gon nuts. Torque Value: 47 [35 ft-lb]