Cummins — INSPECTION

Cylinder Block Connecting Rod Assemblies - Cleaning and Inspection (01-08) N14 Page 1-45 Visually inspect the capscrew threads for damage. Visually inspect under the capscrew heads for cracks. Measure the capscrew outside diameters. Connecting Rod Capscrew O.D. mm in 14.50 MIN 0.571 14.99 MAX 0.590 Caution: The rod cap alpha-numeric characters must match the alpha-numeric characters on the connecting rod and must be installed with the characters aligned to prevent damage to the connecting rods and crankshaft. Use clean 15W-40 oil to lubricate the connecting rod capscrews. Assemble the rod, the cap, and the capscrews. Caution: Use a vise with brass jaws to hold the rod.

Notches, scratches, or dents in the I-beam will cause rod failure. Tighten the capscrews in alternate sequence to the fol- lowing torque values: 1. Tighten to 100 [75 ft-lb]. 2. Tighten to 264 [195 ft-lb].