Crankshaft Pulley - Cleaning and Inspection (01-12) Cylinder Block N14 Page 1-52 Measure the outside pilot diameter. Outside Pilot Diameter mm in 35.013 MIN 1.3785 35.052 MAX 1.3800 Crankshaft Pulley - Cleaning and Inspection (01-12) Cleaning Warning: When performing the following procedures, wear eye protection. Also, the wire brush must be rated for the RPM being used if the brush is motor driven. Use an emery cloth or a steel wire brush. Clean the pulley grooves and the inside and the outside mounting surfaces. Use solvent to clean the pulley. Dry with compressed air.
Inspection Visually inspect the pulley for cracks in mounting web and near the belt grooves, belt groove wear, or other damage.