Cummins — INSPECTION

Cylinder Block Crankshaft Adapter - Cleaning and Inspection (01-11) N14 Page 1-51 Crankshaft Adapter - Cleaning and Inspection (01-11) Cleaning Warning: When performing the following procedures, wear eye protection. Also, the wire brush must be rated for the RPM being used if the brush is motor driven. Use an emery cloth or a steel wire brush. Clean the inside and the outside diameters of the adapter. Use solvent to clean the adapter. Dry with compressed air. Inspection Visually inspect the adapter for cracks. Measure the inside pilot diameter. Inside Pilot Diameter mm in 92.10 MIN 3.626 92.17 MAX 3.629