Cummins — INSPECTION

Crankshaft - Cleaning and Inspection (01-14) Cylinder Block N14 Page 1-58 Measure the main bearing journals outside diameter. Crankshaft Main Bearing Journal O.D. mm in 114.236 MIN 4.4975 114.300 MAX 4.5000 Measure the thrust face width. Crankshaft Thrust Face Width mm in 76.23 MIN 3.001 76.35 MAX 3.006 The crankshaft can be ground undersize if the bearing journals or the thrust distance is not within specifications. Always grind all the journals when one is not within specifications. Oversize rod bearings, main bearings, and thrust bear- ings are available. Refer to the Alternative Repair Manual, Bulletin No. 3379035, for grinding specifications and instructions.

Refer to the Alternate Repair Manual, Bulletin No. 3379035, for procedures to magnetically check for cracks in the crankshaft and gear.