Cylinder Head Cylinder Head - Grinding the Valves (02-06) N14 Page 2-29 Use valve seat grinding machine, Part No. ST-685, and valve guide arbor set, Part No. ST-663, to grind the new valve seat inserts. Refer to ‘‘Grinding the Valve Seats’’ under Cylinder Head - Rebuild (02-02). Cylinder Head - Grinding the Valves (02-06) Cleaning Use Scotch-Brite T 7448, Part No. 3823258, to clean the valve stems. Clean the carbon deposits from the valve face and the head. NOTE: The valves must be clean and free of carbon de- posits before they are ground. Valves can be cleaned by the bead blasting method in the head area only. Use a valve facing machine, Part No. 3376256, to grind the face of the valve.
NOTE: Follow the instructions supplied with the valve facing machine for the correct setup before grinding the valves. Grind the intake and the exhaust valves to the angle shown. Use solvent to clean the metal particles from the valve. Dry with compressed air.