Cam Follower Assembly Cam Follower Assembly - Rebuild (04-02) N14 Page 4-11 Steam clean the cam follower housings. Dry with com- pressed air. Visually inspect the cam follower housings for cracks or damage. Visually inspect the locking screw holes for damaged or distorted threads. Measure the cam follower shaft bore inside diameter. Cam Follower Shaft Bore I.D. mm in 22.200 MIN 0.8740 22.225 MAX 0.8750 Assembly Use Lubriplate W 105 or its equivalent to lubricate the bushingless cam followers and cam follower shafts.