Injectors - Rebuild (06-02) Injectors and Fuel Lines N14 Page 6-8 Injectors - Rebuild (06-02) The disassembly, inspection, repair, and calibration pro- cedure for STC injectors are covered in Shop Manual PT (type D) Step Timing Control Injector, Bulletin No. 3810313. NOTE: CELECT™injectors are presently not rebuildable in the field. Injectors - Calibration (06-03) The injector calibration specifications and parts informa- tion are provided in Injector Specifications, Bulletin No. 3379664. NOTE: CELECT™injectors do not require flow calibration. The CPL (Control Parts List) Manual, Bulletin No.
3379133, is a listing of basic engine parts and timing specifications which are necessary to produce a given engine performance. The CPL number stamped on the engine dataplate is used to identify parts within the en- gine, including the injectors. STC Oil Control Valve - Cleaning (06-04) Warning: When using solvents, acids, or alkaline ma- terials for cleaning, follow the manufacturer’s recom- mendations for use. Wear goggles and protective cloth- ing to avoid personal injury. Plug all openings to prevent dirt from entering the valve. Use a solvent to clean the outside of the valve. Dry with compressed air.