Engine Disassembly (00-01) Coolant Inlet Transfer Connection - Removal N14 Page 0-15 Warning: Because this part weighs more than 23 kg [50 lbs], two people or a hoist will be required to lift the oil cooler assembly to avoid personal injury. Remove the remaining five capscrews from the oil cooler support, and remove the cooler assembly. Coolant Inlet Transfer Connection - Removal Loosen four mounting capscrews, and remove the cool- ant inlet transfer connection from the water pump. Dipstick Tube and Housing - Removal Remove the four capscrews and the housing. Piston Cooling Nozzles - Removal Remove the piston cooling nozzles.
Locking pliers clamped to the piston cooling nozzle flange may be needed to prevent nozzle damage during removal. Remove and discard the o-rings.