Cummins — INSPECTION

Lubricating Oil Pan - Cleaning and Inspection for Reuse (07-01) Lubricating Oil System N14 Page 7-8 Lubricating Oil Pan - Cleaning and Inspection for Reuse (07-01) Cleaning Remove all gasket material from the oil pan gasket seal- ing surface. Warning: When using a steam cleaner, wear protec- tive clothing and safety glasses or a face shield. Hot steam can cause serious personal injury. Use steam to clean the oil pan. Dry with compressed air. Inspection Visually inspect the oil pan for cracks or damage. Visually inspect the inside and the outside of the oil pan for cracks around the suction tube mounting studs. Visually inspect for a cracked or broken suction tube mounting clip. NOTE:

A waterproof, rubberized foam coated oil pan has been developed for applications that are subjected to severe corrosive and abrasive environments. Refer to Service Parts Topics for more information. Visually inspect the threaded holes or thread inserts for damage. NOTE: If the oil pan is cracked or damaged or if the threaded holes are damaged, the oil pan must be replaced.