Cummins — INSPECTION

Lubricating Oil System Lubricating Oil Pump Body and Cover Bushing - Replacement (07-07) N14 Page 7-19 Install new o-rings on the main oil pressure regulator plunger retainer plug. Lubricate the o-rings with vegeta- ble oil. Install the plunger (4), the spring (3), the retainer plug (2), and the capscrew (1). Tighten the retainer plug capscrew. Torque Value: 25 [20 ft-lb] Install a new o-ring on the adapter elbow. Lubricate the o-ring with clean 15W-40 oil. Install the adapter elbow into the lube pump cover. Tighten the adapter. Torque Value: 7 [60 in-lb] NOTE: The adapter must be positioned to align with the DFC signal line.

Lubricating Oil Pump Body and Cover Bushing - Replacement (07-07) Disassembly Use bushing mandrel, Part No. ST-1158, to remove the worn or damaged bushings from the oil pump body and the cover. Inspection Visually inspect the bushing bore in the oil pump body and the cover for damage. Measure the inside diameter of the bushing bore in the oil pump body and cover. Bushing Bore I.D. mm in 25.387 MIN 0.9995 25.413 MAX 1.0005