Cummins — INSPECTION

Water Pump Assembly - Cleaning and Inspection (08-01) Cooling System N14 Page 8-6 Water Pump Assembly - Cleaning and Inspection (08-01) Cleaning Before cleaning the water pump, inspect the weephole for large amounts of chemical fallout. A small amount is normal, but rebuild or replace the pump if a large amount is caked around the weephole. Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam can cause serious personal injury. Use solvent or steam to clean the water pump exterior. Dry with compressed air. Inspection Visually inspect the water pump body for cracks or dam- age.

Visually inspect the impeller for cracks, erosion, or dam- age. Visually inspect the pulley for worn or damaged grooves. Turn the water pump shaft by hand to inspect the bearings and the impeller for freedom of rotation NOTE: If damaged parts are found or the shaft does not rotate freely in the water pump body, the water pump must be replaced or rebuilt. Refer to Water Pump - Rebuild (08-02).