Cooling System Water Pump Assembly - Rebuild (08-02) N14 Page 8-9 Inspection Visually inspect the water pump body for cracks, porosity, or excessive corrosion. NOTE: If the part being inspected does not meet the spec- ification given or if it is damaged or no alternative is given, the part must be replaced. Measure the water pump body bearing bore inside di- ameter. Water Pump Body Bearing Bore I.D. mm in 61.988 MIN 2.4405 62.014 MAX 2.4415 Measure the water pump body seal and seat assembly bore inside diameter. Seal and Seat Assembly Bore I.D. mm in 36.45 MIN 1.435 36.47 MAX 1.436 Visually inspect the water pump impeller for cracks or damage.