Cummins — INSPECTION

Water Pump Assembly - Rebuild (08-02) Cooling System N14 Page 8-10 Measure the water pump impeller bore inside diameter. Impeller Bore I.D. mm in 15.85 MIN 0.624 15.88 MAX 0.625 Visually inspect the water pump drive pulley for cracks or damage. Visually inspect the pulley grooves and the oil seal wear sleeve for wear or damage. Replace the wear sleeve if worn. Measure the drive pulley bore inside diameter. Drive Pulley Bore I.D. mm in 19.037 MIN 0.7495 19.062 MAX 0.7505 Visually inspect the water pump shaft for grooves, nicks, or damage.