Cummins — ASSEMBLY

Thermostat Housing - Cleaning and Inspection (08-05) Cooling System N14 Page 8-22 Measure the inside diameter of the thermostat seal count- erbore in the thermostat housing. Thermostat Seal Bore I.D. mm in 67.39 MIN 2.653 67.46 MAX 2.656 Use a depth micrometer or a depth gauge, Part No. 3823495, to measure the depth of the seal counterbore in the thermostat housing. Thermostat Seal Bore Depth mm in 42.16 MIN 1.66 42.67 MAX 1.68 Assembly Caution: When installing a new seal, the flat side of the seal must be toward the mandrel for correct installation. Use thermostat seal mandrel, Part No. ST-1225, and a lead hammer to install the seal. A counterbore in the housing bore locates the seal.

Install the thermostat in the cover. Install a new gasket on the thermostat housing. Install the thermostat cover and the four mounting cap- screws. Tighten the capscrews. Torque Value: 47 [35 ft-lb] Install the CELECT™coolant temperature sensor into the thermostat housing. Torque Value: 34 [25 ft-lb]