Cummins — INSPECTION

Drive Units Accessory Drive - Rebuild (09-02) N14 Page 9-7 Visually inspect the shaft bore in the housing for scoring or damage. Measure the inside diameter of the shaft bore in the drive housing. Drive Shaft Bore I.D. mm in 33.426 MIN 1.3160 33.515 MAX 1.3195 Measure the drive shaft outside diameter. Drive Shaft Journal O.D. Point mm in (1) 25.476 MIN 1.0030 25.489 MAX 1.0035 (2) 33.274 MIN 1.3100 33.325 MAX 1.3120 (3) 39.624 MIN 1.5600 39.674 MAX 1.5620 (4) 34.963 MIN 1.3765 34.976 MAX 1.3770 Measure the inside diameter of the splined coupling gear or the hub coupling. Splined Coupling I.D. mm in 25.400 MIN 1.0000 25.425 MAX 1.0010 Hub Coupling I.D.

mm in 25.425 MIN 1.0010 25.438 MAX 1.0015