Exhaust System Exhaust Manifold Turbocharger Mounting Stud - Replacement (11-02) N14 Page 11-5 Exhaust Manifold Turbocharger Mounting Stud - Replacement (11-02) Apply penetrating oil to the base of the turbocharger mounting stud to be removed. Use a standard stud extractor to remove the turbocharger mounting stud(s) from the center section. Mounting Hole Threads - Inspection Visually inspect for damaged threads in the turbocharger mounting stud holes. If threads are damaged (cross-threaded, etc.), chase the threads with a 3/8-16 N.C.-38 tap. Visually inspect the manifold sections for cracks or damage. NOTE:
Install the shorter threaded end of the turbocharger mounting stud in the exhaust manifold flange. Apply a coat of anti-seize compound to the threads. Install the studs in the mounting flange. Use two mounting nuts locked together to tighten the studs. Torque Value: 40 [30 ft-lb]