Priming the Lubricating Oil and Fuel Systems (14-02) Engine Testing N14 Page 14-18 If the parameter is to be bypassed with the Compulink™, refer to the following instructions. Select ‘‘Troubleshooting’’, key (1), from the ‘‘Main Menu Option’’ screen. Select ‘‘Special Functions’’, key (4), from the ‘‘Trouble- shooting Menu’’. Select ‘‘Set Up for Compuchek’’ from the ‘‘Special Func- tions Menu’’. The Compulink™ must be left in this mode throughout the test. The setup is now completed, and the auto/manual throttle control can be used to control engine speed. NOTE: The throttle control must be used in the manual position.
Use the active keys to cancel or back up the Compulink™ when the test is complete. Priming the Lubricating Oil and Fuel Systems (14-02) Lubricating Oil System Priming Caution: The lubricating oil system must be primed be- fore operating the engine after any internal engine re- pairs or extended engine storage (beyond 6 months) to avoid internal component damage. Do not prime the system from the bypass filter; the filter will be damaged.