Cummins — ELECTRONIC HOOKUP - CELECT ENGINES ONLY

Engine Testing Engine Dynamometer - Install Engine (14-01) N14 Page 14-17 Select the ‘‘Feature Selection’’ from the menu options by depressing the number on the keypad. The next screen will show if the ‘‘Progressive Shift Fea- is turned or Check the ‘‘Progressive Shift Feature’’. If is dis- played, depress the number key on the keypad to display and turn the ‘‘Progressive Shift’’. NOTE: Turn the ‘‘Progressive Shift Feature’’ back when the test is completed. Depress the active key to cancel or back up to the screen showing the Menu Option’’. The ECM is equipped with a tamperproof system that limits engine speed when the vehicle speed signal is lost.

This parameter must be bypassed with the Compulink™ in the Compuchek W mode or if the Compulink™is needed to monitor engine data, the adjustable parameters must be adjusted outside the engine operating range. To save, adjust, and write parameters to and from the ECM, refer to the CELECT™Compulink™Cartridge Man- ual, Bulletin No. 3810472. NOTE: Parameters must be returned to their original value when the test or run-in is completed.