Chassis Dynamometer Operation (14-04) Engine Testing N14 Page 14-30 Make sure the tires are inflated to the manufactur- er’s specifications. Remove all rocks or other material from the tread of all tires that will be rotating on the dynamometer rollers. Make sure there is correct overhead clearance for exhaust stacks, air deflectors, or other attachments above the cab. Caution: The ‘‘tie down’’ chains must have slack in their tension to prevent damage to the chassis dynamometer. Carefully position the vehicle on the rollers. Attach the chains to the rear of the vehicle, and put wheel chocks in front of the front wheels.
Adjust the vehicle and dynamometer room exhaust system to make sure all exhaust gases are removed from the room. Refer to the chassis dynamometer and vehicle man- ufacturer’s recommendations and specifications for testing procedures.