Cummins — ENGINE STORAGE - SHORT TERM

Engine Storage - Short Term (14-09) Engine Testing N14 Page 14-44 Turn the fuel pump manual shutoff valve counterclock- wise until it stops. Remove the electrical wiring from the fuel pump solenoid. Drain the cooling system. NOTE: It is not necessary to drain the coolant if it is a permanent type antifreeze with a rust inhibitor. Do not drain the coolant if the engine is installed in a vehicle. Cover all openings with tape to prevent dirt and moisture from entering the engine. Install a warning tag on the engine. The tag must indicate that the engine does not contain oil and must not be operated. Store the engine in an area that is dry and has a constant temperature.

Use the accessory drive shaft to rotate the crankshaft two to three revolutions every 3 to 4 weeks.