Cummins — ENGINE STORAGE - LONG TERM

Engine Testing Engine Storage - Long Term (14-10) N14 Page 14-45 Remove the Engine From Short Term Storage Remove the tape from the openings. Remove the warn- ing tag. Replace the oil, water, and fuel filters. Prime the lubricating oil system. Refer to Priming the Lubricating Oil System (14-02). Use clean diesel fuel to flush the preservative oil from the fuel system. Fill the cooling system (if necessary). Adjust the injector and valve clearance. Refer to Engine Assembly (00-02). Adjust the belt tension. Refer to Engine Assembly (00-02). Engine Storage - Long Term (14-10) This procedure describes the proper method to prepare an engine for long term storage (6 to 24 months). NOTE:

After 24 months in storage, the engine cooling sys- tem must be flushed with a suitable solvent or a light, hot oil. This procedure must then be repeated. Operate the engine at ‘‘High Idle’’ speed until the coolant temperature indicator reaches: Temperature: 70°C [160°F] Shut off the engine.