Cummins — CAPSCREW MARKINGS AND TORQUE VALUES - U.S. CUSTOMARY

Specifications Capscrew Markings and Torque Values NT 855 Page 18-5 Capscrew Markings and Torque Values Caution: When replacing capscrews, always use a capscrew of the same measurement and strength as the capscrew being replaced. Using incorrect capscrews can result in engine damage. SAE capscrews are graded according to the strength of the capscrew. They are marked on the head so the correct strength and torque value are known. The table below lists the capscrew markings and the correct value for the capscrew. SAE capscrews are identified by: U.S. Customary (5/16 X 18 X 1 1/2) 5/16 18 1 1/2 Major Number Length Thread Threads in Diameter per Inch Inches in Inches Notes: 2.

Do not use the torque values in place of those specified in other sections of this manual. It is important to use the correct torque values for SAE grade 5 and 8 capscrews. 1. Always use the torque values listed in the following table when specific torque values are not available. 3. The torque values in the table are based on the use of lubricated threads. Capscrew Markings and Torque Values - U.S.

Customary SAE Grade Number 5 8 Capscrew Head Markings These are all SAE Grade 5 (3) line Capscrew Torque - Grade 5 Capscrew Capscrew Torque - Grade 8 Capscrew Capscrew Body Size Cast Iron Aluminum Cast Iron Aluminum (Inches) - (Thread) ft-lb ft-lb ft-lb ft-lb 1/4 - 20 9 7 8 6 15 11 12 9 - 28 12 9 9 7 18 13 14 10 5/16 - 18 20 15 16 12 30 22 24 18 - 24 23 17 19 14 33 24 25 19 3/8 - 16 40 30 25 20 55 40 40 30 - 24 40 30 35 25 60 45 45 35 7/16 - 14 60 45 45 35 90 65 65 50 - 20 65 50 55 40 95 70 75 55 1/2 - 13 95 70 75 55 130 95 100 75 - 20 100 75 80 60 150 110 120 90 9/16 - 12 135 100 110 80 190 140 150 110 - 18 150 110 115 85 210 155 170 125 5/8 - 11 180 135 150 110 255 190 205 150 - 18 210 155 160 120 290 215 230 170 3/4 - 10 325 240 255 190 460 340 365 270 - 16 365 270 285 210 515 380 410 300 7/8 - 9 490 360 380 280 745 550 600 440 - 14 530 390 420 310 825 610 660 490 1 - 8 720 530 570 420 1100 820 890 660 - 14 800 590 650 480 1200 890 960 710 Refer to the notes above.