2-32 CAB AND FRAME Front Door Trim Pad Component N2A0058E Legend 1. Inner waist seal 6. Screw 2. Guard bar (High cab model, wide cab model) 7. Power window switch 3. Power window switch connector 8. Grommet 4. Door pull case 9. Window regulator handle (if equipped) 5. Front door trim pad Removal 4. Window regulator handle (1). (if equipped) 1. Disconnect the battery ground cable. 2. Guard bar (high cab model, wide cab model) Pull the fixing pin (2) to remove the washer (3) and body. Open the grommet and remove the 2 screws. 3. Inner waist seal Remove the clips one by one with a bladed screwdriver. Note that excessive force will cause deformation.
Be careful not scratch the pillar with their edge while removing.