CAB AND FRAME 2-33 N2A0059E 5. Power window switch (3) Pull out the switch from the door trim pad and disconnect the connector (1). 6. Screw (2) 7. Door pull case (4) Remove the 2 mounting screws. N2A0061E Installation For installation, reverse the removal procedure taking the following points into consideration. 1. Adjust the trim pad clip to the mounting hole (1) on the door panel side and install the trim pad so as to prevent any float, skewness or door harness bite. N2A0060E Caution: The above parts 3 to 5 can be removed in any order or each of them can be removed independently. 8. Front door trim pad (5) Remove the clips at 13 positions. N2A0062E