CAB AND FRAME 2-39 N2A0072E Legend 1. Glass run 4. Sealant 2. Glass guide 5. Lip 3. Sealant application range 6. Channel within the door Fit the glass run with the lip toward the outside of the vehicle. 2. While the front side of the glass is lowered, insert the glass into the door panel. First, insert the rear side of the glass into the glass run, then insert the front side into the glass run. Raise the front side gradually along the glass run. 3. Temporarily tighten the window regulator mounting screw (3) (basic hole) and tighten (1) to (5) firmly. Lastly, tighten (3) (basic hole) firmly. Tighten:
Window regulator mounting screw to 6 N m (0.6 kg m/4 lb ft) — 7.8 N m (0.8 kg m/6 lb ft) Caution: When reusing the glass run, apply the sealant to the range shown in the figure. Sealant: CEMEDINE 366DX or equivalent