1E-102 Electronic control fuel injection system (Common rail type) Pressure limiter Common rail pressure sensor 4 3 4 3 1 2 1 2 TSWG0012 TSWG0012 Name 1. Common rail 2. Common rail pressure sensor 3. Pressure limiter 4. Flow damper Name 1. Common rail 2. Common rail pressure sensor 3. Pressure limiter 4. Flow damper The pressure limiter operates to release the pressure in common rail when the pressure becomes extremely high. The common rail pressure sensor is installed onto common rail, detects fuel pressure in common rail, converts the pressure into the voltage signal and sends it to engine control module (ECM). Voltage becomes higher as pressure becomes higher, and lower as one does lower.
ECM calculates the actual common rail pressure (fuel pressure) based on the voltage signal sent from sensors and uses it for fuel injection control etc. Removal Do not replace the pressure limiter. If it is damaged, replace it as common rail ASM. Removal Do not replace the common rail pressure sensor. If it is damaged, replace it as common rail ASM. TSWG0190