1E-156 Electronic control fuel injection system (Common rail type) Step Action Value YES NO 8 1. Clear the DTC. Refer to “How to clear diagnosis trouble code (DTC)” of “Procedure of trouble diagnosis” in this section for how to clear DTCs. 2. Turn the key switch to “OFF” for more than 10 seconds. 3. Start the engine. Is the trouble detected? — Go to Step 9. Go to Step 2. 9 Check the DTC. Is DTC detected? — Go to the relevant diagnosis of DTC detected. Check the repair, and Go to “OBD system check”. 10 1. Check the PCV-LOW circuit between the ECM and the PCV. 2. If the trouble is detected, repair the circuit as required. Is the procedure completed? — Go to Step 11. — 11 1.
Check for following faults. • Engine mechanical timing is off. • Improper installation position of flywheel • Excessive clogging in intake system • Excessive clogging in exhaust system 2. If the trouble is detected, repair as required. Is the trouble detected? — Go to Step 8. —