1E-162 Electronic control fuel injection system (Common rail type) EGR control system check EGR position sensor signal Common rail pressure sensor signal G sensor signal EGR position sensor signal EGR position sensor signal 5V Engine control module (ECM) B+ B+ B+ 98 E-56 101 E-56 82 E-56 100 E-56 90 E-56 87 E-56 92 E-56 110 E-56 93 E-56 103 E-56 94 E-56 111 E-56 5 H-20 H-20 H-20 H-20 H-20 H-8 H-8 H-8 H-8 H-8 H-8 14 6 13 12 3 7 2 6 1 5 0.5 Br 0.5 L/W 0.5 L 0.75 L 0.75 GY 0.75 W/L 0.75 G/W 0.75 W/B 0.75 G/B 0.75 W/R 0.75 L/W 0.5 L/W 0.75 B/W 0.5 L 0.5 Br 1 E-80 2 E-80 6 E-80 3 E-80 7 E-80 4 E-80 8 E-80 5 E-80 1 E-112 2 E-112 3 E-112 1 E-113 3 E-113 2 E-113 W V U EGR position sensor/EGR motor EGR valve Common rail pressure sensor G sensor TSWG0080 Circuit description The ECM operates the EGR valve based on engine speed, engine coolant temperature, intake air temperature, fuel injection amount, and barometric pressure.
The EGR motor drives the EGR valve, and the EGR position sensor detects the EGR valve opening angle. Step Action Value YES NO 1 1. Turn the key switch to “ON”. 2. Check the DTC. Is DTC detected? — Go to the relevant diagnosis of DTC detected. Go to Step 2. 2 Is the scan tool (KW communication) available? — Go to Step 3. Go to Step 8.