hitachi — DTC: P0107 (Flash code 71) Barometric pressure sensor circuit input is low (open circuit or ground short)

1E-204 Electronic control fuel injection system (Common rail type) DTC: P0107 (Flash code 71) Barometric pressure sensor circuit input is low (open circuit or ground short) A A Engine control module (ECM) CAN HIGH CAN LOW 37 E-57 18 E-57 60 E-57 20 E-57 41 E-57 63 E-57 42 E-57 64 E-57 61 E-57 71 E-57 72 E-57 Machine control unit CAN HIGH CAN LOW 6 FL-167 5 FL-167 4 FL-167 6 FL-167 5 FL-167 4 FL-167 1 FL-269 2 FL-269 3 FL-269 2 FB-124 1 FB-124 Intake air temperature sensor Barometric pressure sensor Accelerator position sensor TSWG0081 Description of circuit Preconditions when DTC is set The barometric pressure sensor detects the barometric pressure.

The barometric pressure sensor is installed to the machine. As the barometric pressure changes depending on altitude and weather condition, output voltage of the barometric pressure sensor will change (if the barometric pressure is low, output voltage becomes low, if the barometric pressure is high, the output voltage becomes high as well). The engine control module (ECM) reads this output voltage change, converting it into barometric pressure, to utilize for optimizing the fuel injection control and for calculating the relative boost pressure. Key switch input voltage is 16V or more. DTC P1630 or P1632 is not detected. DTC set condition Barometric pressure sensor voltage is 0.5 V or less.

Action taken when DTC is set Trouble is displayed on the monitor of the machine or diagnosis lamp comes on. Main trouble symptom Back-up mode Due to back-up equivalent to 2500m (8200ft) Black smoke emitted at high altitude Output shortage at low altitude • Specified back-up value Accelerator Accelerator position position sensor 1 signal sensor 2 signal 5V Intake air Barometric pressure temperature sensor signal sensor signal 5V Vcc