hitachi — DTC: P0117 (Flash code 23) Engine coolant temperature sensor fault (low voltage fault, GND short, short circuit)

1E-236 Electronic control fuel injection system (Common rail type) About ECT sensor 1 2 3 1 2 3 TSWG0061 Breaker box inspection procedure Name 1. Sensor ground (for engine control) 2. Sensor signal (for engine control) 3. Sensor signal (for meter) Perform the inspection in the following procedure if there is such an instruction to use breaker box in the step. After inspection, return to the diagnostic step. Characteristics of ECT sensor The output voltage of ECT sensor changes according to the engine coolant temperature. The scan tool with CAN communication displays a fixed value when the value exceeds the threshold voltage.

Therefore, judge as it is more than the threshold value if the value of 40 ° C ( 40 ° F) or 120 ° C (248 ° F) is not changed. When error occurs, error value (214 ° C {419 ° F}) is displayed. The following illustration shows the correlation between physical value and voltage displayed in the scan tools with CAN communication. Tech2 and scan tools with KW communication can display both physical value and voltage. (V) Name 1. Breaker box 2. DMM 4.7441 0.2129 -40 (-40) 120 (248) F TSWG0181