1E-278 Electronic control fuel injection system (Common rail type) DTC: P0202 (Flash code 272) Open circuit in injection nozzle #2 drive system Injector (Cylinder No. 3) Injector (Cylinder No. 1) Injector (Cylinder No. 2) Injector (Cylinder No. 4) Injector (Cylinder No. 6) Injector (Cylinder No.
5) 2 1 E-35 2 1 E-37 2 1 E-33 2 1 E-29 2 1 E-27 1 2 E-31 3 3 E-27 3 E-31 3 E-35 3 E-37 3 E-33 E-29 3 H-95 7 H-95 6 H-95 2 H-95 4 H-95 3 H-94 7 H-94 2 H-94 6 H-94 4 H-94 3 H-95 7 H-95 6 H-95 2 H-95 4 H-95 3 H-94 7 H-94 2 H-94 6 H-94 4 H-94 1.25 R 0.75 L/Y 0.75 L/R 0.75 G/B 1.25 R 1.25 W 0.75 G/R 0.75 L 0.75 L/W 1.25 W 3 H-12 H-12 H-12 H-12 H-12 H-12 H-12 H-12 6 7 11 4 12 8 5 116 E-56 120 E-56 118 E-56 115 E-56 121 E-56 114 E-56 119 E-56 117 E-56 Cylinder No. 3 Cylinder No. 1 Cylinder No. 2 Cylinder No. 4 Cylinder No. 6 Cylinder No. 5 Feedback Feedback Feedback Feedback Feedback Feedback B+ B+ Engine control module (ECM) TSWG0076 Description of circuit The injector performs fuel injection.
The injector is installed in the engine head. The engine control module (ECM) controls the fuel injection amount and timing by controlling the energizing time to the injector. Also, it generates the voltage for injector operation and energizes the pressurized voltage (more than 100 V) to the injector. For injector operation, the voltage applied to the injector will be sent back the to the ECM through injector as a signal, and the ECM controls this signal.