hitachi — Data Display

Electronic control fuel injection system (Common rail type) 1E-37 Data Display Softkey functions 1. Select “F1: Data Display” on the “Engine” screen. F1: Data Display Displays the information concerning various parts of the engine and transmission as data on the screen of the Tech2. A maximum of 5 data parameters can be fixed on the “Data Display” screen. The 5 fixed parameters will be retained at the upper part of the screen, even when the display is scrolled up or down. To fix parameters, bring the highlight bar to the desired parameter on the screen, which appears as you select the softkey “Select Items”, and press the [ENTER].

The selected item can be identified by the asterisk (*) which will be placed atop the parameter. Move the highlight bar with the selection keys ( ), and once you have chosen all the parameters you want fixed, press the softkey “Accept”. “Data Display” screen is displayed again. To modify the fixed parameter list, choose “Select Items”, move the highlight bar to the parameter you want changed, and press the [ENTER] key. The parameter will be cleared. Choosing “Clear All” will clear all the fixed parameters. If you select the softkey “DTC” while the “Data Display” function remains active, DTC will be displayed on the “Data Display” screen.

Snapshot can be used while the “Data Display” function remains active. For this, choose “Quick Snapshot.” Choosing the softkey “More” allows to use additional functions. For “Quick Snapshot,” refer to “Snapshot.” TSWG0097 2. F1: Choosing “Data Display”, the engine data is displayed. TSWG0098 V V RPM RPM V V % MPa