1E-448 Electronic control fuel injection system (Common rail type) About ECT sensor The following illustration shows the correlation between physical value and voltage displayed in the scan tools with CAN communication. Tech2 and scan tools with KW communication can display both physical value and voltage. 1 2 (V) 4.7441 3 1 2 3 TSWG0061 0.2129 Name 1. Sensor GND (for engine control) 2. Sensor signal (for engine control) 3. Sensor signal (for meter) -40 (-40) 120 (248) TSWG0181 F Breaker box inspection procedure Characteristics of ECT sensor Perform the inspection in the following procedure if there is such an instruction to use breaker box in the step.
After inspection, return to the diagnostic step. The output voltage of ECT sensor changes according to the engine coolant temperature. The scan tool with CAN communication displays a fixed value when the value exceeds the threshold voltage. Therefore, judge as it is more than the threshold value if the value of 40 ° C ( 40 ° F) or 120 ° C (248 ° F) is not changed. Name 1. Breaker box 2. DMM Step Item to be checked Inspection method Measuring condition Terminal No. Normal value Abnormal value 5 Short circuit to other signal circuit Voltage measurement • Disconnect the sensor connector. • Key switch “ON” 84 - Ground 0V 1V or more