hitachi — DTC: P1262 (Flash code 159) Injection nozzle common 2 drive system fault

Electronic control fuel injection system (Common rail type) 1E-469 Step Action Value YES NO 18 1. Check the No. 4 cylinder injector drive circuit between ECM and coupling connector (H-95) for short circuit to the power supply circuit or ignition power supply circuit using breaker box or DMM. Refer to “Breaker box inspection procedure”. Note: If breaker box is not available, refer to “On- board check procedure for sensors”. 2. If the trouble is detected, repair as required. Is the trouble detected? — Go to Step 27. Go to Step 24. 19 1. Check the No.

5 cylinder injector drive circuit between ECM and coupling connector (H-95) for short circuit to the power supply circuit or ignition power supply circuit, using breaker box or DMM. Refer to “Breaker box inspection procedure”. Note: If breaker box is not available, refer to “On- board check procedure for sensors”. 2. If the trouble is detected, repair as required. Is the trouble detected? — Go to Step 27. Go to Step 24. 20 1. Check the No. 6 cylinder injector drive circuit between ECM and coupling connector (H-95) for short circuit to the power supply circuit or ignition power supply circuit, using breaker box or DMM. Refer to “Breaker box inspection procedure”. Note:

If breaker box is not available, refer to “On- board check procedure for sensors”. 2. If the trouble is detected, repair as required. Is the trouble detected? — Go to Step 27. Go to Step 24.