Electronic control fuel injection system (Common rail type) 1E-47 3. Choose “More” out of the 4 softkeys on the display screen. First Frame: Allows to view the top data frame. Trigger Frame: Allows to view a triggered frame. Last Frame: Allows to view the last data frame. More: Switches the displayed softkeys. 4. Choose “More” out of the 4 softkeys on the display screen. Units: Changes the unit (speed/temperature). Previous Frame: Allows to view changes of data by reversing it, frame No. by frame No. Next Frame: Allows to view changes of data by feeding it forward, frame No. by frame No. More: Switches the displayed softkeys. 5. Choose “More” out of the 4 softkeys on the display screen. DTC:
Shows the frames in which a Trouble Code was issued, in the range from the top frame to the displayed frame. Previous DTC-Chg: Shows the frames in which a Trouble Code was issued, in the range before the displayed frame. Next DTC-Chg: Shows the frames in which a Trouble Code was issued, in the range after the displayed frame. More: Switches the displayed softkeys. 6. Choose “More” out of the 4 softkeys on the display screen. The Snapshot Replay screen is restored. F1: Set Clock Resets the date and time of the Tech2. Before exiting this menu, press the softkey “Set Clock” to save the settings. F2: Set Unit Switches the unit between the English and the Metric system. F3:
Set Contrast Changes the screen contrast (lighter or darker). The change will be saved even after the Tech2 is switched off. Tech2 self test menu F0: Automated Main PCB and VCI Automatically executes function tests on the Main PCB and VCI modules. F1: Automated Main PCB Automatically executes function tests on the Main PCB module. F2: Automated VCI Automatically executes function tests on the VCI module. F3: Selectable Main PCB Allows to check detailed information on the PCB module test items. F4: Selectable VCI Allows to check detailed information on the VCI module test items. F5: Power On Self Test Results Displays POST test results again. Difference in operation of Snapshot Data Replay:
The operations of Snapshot Data Replay under “F2: View Captured Data” are somewhat different from those of Replay (softkey function “Review Data”) under “F2: Snapshot”. Be careful not to confuse them. Set clock Operation procedure: 1. Choose the “F2: Tool Options” and press [ENTER]. 2. Choose the “F1: Set Clock” and press [ENTER]. 3. Display the “Set Real-Time Clock” screen. Move the cursor to the item you want changed by operating the selection keys ( ), and press the [ENTER] key. Tool options Tool Options is the function to conduct a detailed test, in case communication cannot be established with the machine at the time of setup of the Tech2 or at the time of Power On Self Test (POST).
Note: Each press on the [ENTER] key will increment the numeric value one by one, but it will not exceed the preset maximum value. Tool option menu F0: Tech2 Self Test Allows to conduct a test that assists with the diagnostics of the Tech2 itself. Normally the Self Test function need not be executed, since the Tech2 conducts the Power On Self Test (POST) every time it is switched on. If the POST demonstrates any trouble, the results of the POST can be checked choosing the Self Test menu.