hitachi — Exhaust gas contains a lot of black smoke.

Electronic control fuel injection system (Common rail type) 1E-561 Step Action Value YES NO 11 1. Check the version of ECM software. 2. Rewrite the software if version upgraded is necessary. Refer to “How to use flash tool” in this section for check and rewriting of ECM. Note: EGR valve position learning is required after replacing or rewriting the ECM. Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 13. Go to Step 12. 12 Replace the ECM. Note: EGR valve position learning is required after replacing or rewriting the ECM.

Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 13. — 13 Check for the engine symptom again. Is the engine symptom corrected? — Go to Step 15. Go to Step 14. 14 Check the mechanical part of the engine, and repair if faulty. • Compression pressure • Valve system • Injector • Timing gear • Related part of piston/crank Is the procedure completed? — Go to Step 15. — 15 Repair the machine, and check the repair. Is the procedure completed? — Verify repair. —