0A-2 General Information General Information Service Precautions 6. All regular tools, gauges and special tools should be regularly inspected, and prepared before starting work. Do not use bent spanners, hammers with damaged edges, chipped chisels, or any other faulty or damaged tools. In order to carry out work safely 1. Always use an engine stand when taking the engine down from the vehicle. Do not place the engine directly onto the ground, or place in a manner that interferes with the oil pan. 2. If you are working together with others, always pay attention to each other's safety. 3.
If you are repairing any part of the electrical system, always remove the minus side cable from the battery terminal before starting work. If you are removing the battery cover, always remove the cover in a place that is away from sources of fire/heat. 7. Always pay close attention to safety and handling requirements when using grinders, cranes, welders, and other such equipment. Moreover, always wear the correct protective garments and use the necessary safety tools for the job in hand. 4. Do not perform painting work or leave the engine running for long periods of time in an enclosed or badly ventilated indoor workshop. 5.
Always use the correct specialized tool indicated in the instructions. Using the incorrect tool may cause damage to the parts or injury to the person using the tool.